The main issue with collecting data is being overwhelmed by all the measurements. Not only do you have to spend time programming a data logger, but you also have to babysit the logger to make sure it continues to function without interruption. We set out to solve all of these problems and more with the EM60 series data loggers.
Measures up more than ever before
Because the EM60G is plug and play, it’s a lot easier to use. Especially since we’ve updated it to self-recognize what’s plugged into each port, creating an even more integrated system that does everything for you. Since this data logger is fully automated, it saves you time. Because it’s simple to set up, it saves you leg work.
High-tech that takes no time at all
We updated the EM60G with the goal of speeding up data collection. We added GPS so it automatically keeps track of where data is collected. Integrated barometric pressure and temperature eliminate the need to install extra sensors.
Plus, the EM60G’s seamless system doesn’t require any integration on your part. The hardware, software, connectivity, and firmware all work together automatically. So you get the data you need, in the format you want, anywhere you want to review it.
Setup made simple
With the EM60G, you just tell the data logger how often to read. It collects and stores data at a selected interval, and because everything is plug and play there’s less wiring and programming to worry about, making measurements extremely easy to take.
Outlasts in addition to outperforming
The best data logger is the consistent kind. We’ve added significant improvements like an integrated solar charging panel, so there’s hardly any power maintenance required. The EM60G uses rechargeable nickel-metal hydride (NiMH) batteries and a built-in solar panel for extended deployments. Pull the battery tab to power on the logger and the NiMH batteries will charge automatically. Unlike our standard Em50 and Em50G, this self-contained data logger is built to power, read, and log data from six sensors. The logger case is rated NEMA 4, IP55 for long-term outdoor use.
The data logger that goes the distance
Rely on the EM60G data logger for an advanced combination of simple setup capabilities and a durable design that will save you time and reduce your workload and worry.
- Plug and play with METER sensors
- Six sensor ports
- Download and view data anywhere with an internet connection
- First year worldwide cellular service included with logger purchase
- Best for viewing data on the go, and as frequently as multiple times per day
- See signal strength and connection quality in real time: test connectivity at your site BEFORE installation
- Simple setup
- Integrated GPS
- Integrated temperature and barometric pressure measurement
- Hardware, software, connectivity, and firmware all work together automatically
- Rechargeable nickel-metal hydride (NiMH) batteries
- Built-in solar panel for extended deployments
- Stores 40,000 to 80,000+ records, depending on configuration
- Transmitted data is backed up in the data logger memory to give you extra data protection
- A “confirm data transfer” protocol makes sure data transmission is correct and complete
Six, each supporting METER analog, digital, or pulse sensors
3.5 mm "stereo jack" connector
5 minutes to 12 hours
Hourly. Contact support for options for more frequent data delivery.
8 MB (40,000 to 80,000+ records, depending on configuration)
Non-volatile flash, full data retention with loss of power
Integrated 56-channel GPS/QZSS receiver
Daily (automatic), on demand (manual)
Up to 3 m with good sky view
Synchronize daily (GPS), on upload, or on demand (software)
Five AA NiMH (included) or alkaline batteries
|Battery service life|
NiMH: 3+ years with good view of sun
Standard USB cable, USB A to Micro-B
UMTS 3G 5-band cellular module with 2G fallback
AT&T and T-Mobile in the US with 200+ global partner carriers. Cellular and data hosting service provided by METER Group.
Weather-, impact-, and UV-resistant polymer
IP55, NEMA 3R
12.7 cm x 20.3 cm x 5.1 cm (5 in. x 8 in. x 2 in.)
Hinged door with latches, eyelet for securing with user-supplied padlock or zip tie
-40 to 60 °C, up to 100% RH
Have a question or problem? Our support team can help.
We manufacture, test, calibrate, and repair every instrument in-house. Our scientists and technicians use the instruments every day in our product testing lab. No matter what your question is, we have someone who can help you answer it.
Phone US: +1 509-332-5600
Phone Europe: +49 89 12 66 52 0